Part Number Hot Search : 
PS253 4880D 319215B 2701799 150V1 150V1 ADP1148 MC8640D
Product Description
Full Text Search
 

To Download MC12093 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Freescale Semiconductor, Inc.Order this document by MC12093/D
MC12093
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 /2, /4, /8 1.1GHz Low Power
Prescaler with Stand-By Mode
The MC12093 is a single modulus prescaler for low power frequency division of a 1.1 GHz high frequency input signal. Motorola's advanced MOSAICTM V technology is utilized to acheive low power dissipation of 6.75 mW at a minimum supply voltage of 2.7 V. On-chip output termination provides output current to drive a 2.0 pF (typical) high impedance load. If additional drive is required for the prescaler output, an external resistor can be added parallel from the OUT pin to GND to increase the output power. Care must be taken not to exceed the maximum allowable current through the output. Divide ratio control inputs SW1 and SW2 select the required divide ratio of /2, /4, or /8. Stand-By mode is featured to reduce current drain to 50 A typical when the standby pin SB is switched LOW disabling the prescaler. 1.1 GHz Toggle Frequency Supply Voltage 2.7 V to 5.5 Vdc Low Power 3.0 mA Typical Operating Temperature -40 to 85C Divide by 2, 4 or 8 Selected by SW1 and SW2 Pins On-Chip Termination
MECL PLL COMPONENTS /2, /4, /8 LOW POWER PRESCALER WITH STAND-BY MODE
SEMICONDUCTOR TECHNICAL DATA
ARCHIVE INFORMATION
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
8 1
* * * * * *
D SUFFIX PLASTIC PACKAGE CASE 751 (SO-8)
MOSAIC V is a trademark of Motorola PIN CONNECTIONS
SW L H L H SW2 L L H H Divide Ratio 8 4 4 2 IN VCC SW2 OUT
1 2 3 4 8 7 6 5
FUNCTIONAL TABLE
IN SB SW1 Gnd
NOTES: 1. SW1 & SW2: H = (VCC - 0.5 V) to VCC; L = Open. 2. SB: H = 2.0 V to VCC, L = GND to 0.8 V.
(Top View) A LOW on the Stand-By Pin 7 disables the device.
Function Chart ORDERING INFORMATION
IN /2 /4 /8 Device MC12093D Operating Temp Range TA = -40 to 85C Package SO-8
(c) Motorola, Inc. 1998
Rev 4
MOTOROLA RF/IF DEVICE DATA For More Information On This Product,
1
Go to: www.freescale.com
ARCHIVE INFORMATION
Freescale Semiconductor, Inc...
Freescale Semiconductor, Inc. MC12093
Figure 1. AC Test Circuit
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
C1 IN 50 IN C2 GND VCC SB SW1 SW2 OUT
VCC = 2.7 to 5.5 V
C3
C4
EXTERNAL COMPONENTS C1 = C2 = 1000 pF C3 = 0.1 F C4 = 2.0 pF Load
ARCHIVE INFORMATION
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
MAXIMUM RATINGS Parameter
Power Supply Voltage, Pin 2 Operating Temperature Range Storage Temperature Range Maximum Output Current, Pin 4
NOTE: ESD data available upon request.
Symbol
VCC TA Tstg IO
Value
-0.5 to 6.0 -40 to 85 -65 to 150 4.0
Unit
Vdc C C mA
ELECTRICAL CHARACTERISTICS (VCC = 2.7 to 5.5 V; TA = -40 to 85C)
Parameter Toggle Frequency (Sine Wave) Supply Current Stand-By Current Stand-By Input HIGH (SB) Stand-By Input LOW (SB) Divide Ratio Control Input HIGH (SW1 & SW2) Divide Ratio Control Input LOW (SW1 & SW2) Output Voltage Swing (2.0 pF Load) Output Frequency 12.5-350 MHz (Note 1) Output Frequency 350-400 MHz (Note 2) Output Frequency 400-450 MHz (Note 3) Output Frequency 450-550 MHz (Note 4) Input Voltage Sensitivity 250-1100 MHz 100-250 MHz Symbol ft ICC ISB VIH1 VIL1 VIH2 VIL2 VOUT 0.6 0.5 0.4 0.3 VIN 100 400 0.80 0.70 0.55 0.45 - - - - - - 1000 1000 mVpp Min 0.1 - - 2.0 Gnd VCC - 0.5 OPEN Typ 1.4 3.0 120 - - VCC OPEN Max 1.1 4.5 200 VCC 0.8 VCC + 0.5 OPEN Vpp Unit GHz mA A V V V
NOTES: 1. Input frequency 1.1 GHz, /8, minimum output frequency of 12.5 MHz. 2. Input frequency 700-800 MHz, /2. 3. Input frequency 800-900 MHz, /2. 4. Input frequency 900-1100 MHz, /2.
2
For More Information On This Product, MOTOROLA RF/IF DEVICE DATA Go to: www.freescale.com
ARCHIVE INFORMATION
Freescale Semiconductor, Inc...
Freescale Semiconductor, Inc. MC12093
OUTLINE DIMENSIONS
D SUFFIX ARCHIVED BY FREESCALE SEMICONDUCTOR, PACKAGE INC. 2005 PLASTIC CASE 751-06 (SO-8) ISSUE T C
5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_
A
8
D
E
1 4
H
0.25
M
B
M
h B C e A
SEATING PLANE
X 45 _
q
ARCHIVE INFORMATION
L 0.10 A1 B 0.25
M
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
CB
S
A
S
q
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan. 81-3-5487-8488
MOTOROLA RF/IF DEVICE DATA For More Information On This Product, Go to: www.freescale.com
MC12093/D 3
ARCHIVE INFORMATION
Freescale Semiconductor, Inc...


▲Up To Search▲   

 
Price & Availability of MC12093

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X